Hydraulic Vibratory Hammer Photo
BRUCE Hydraulic Vibratory Hammer Photo
Eccentric Moment: 6.6 kg.m
Eccentric Moment: 6.6 kg.m
Eccentric Moment: 7.6 kg.m
Eccentric Moment: 9 kg.m
SGV-40,60 & 80E are built and designed for excavators weighting from 20 tons to 50 tons.
It is built for simplicity, safety, and efficient operation.
Only short hoses are needed for connecting to excavators and clamp cylinder hoses are well protected
A WIDE RANGE OF CONSTRUCTIONAL AREAS
Because of its small size and simple operation procedure, it can be applied for a wide range of working environment such as restriction, drainage maintenance, river-bank maintenance and marshland working wherever onshore and offshore driving job.
ROTATING MOUNTING BRACKET
Excavator mounted Vibratory Hammers are equipped with a rotating mounting bracket that allows the Vibratory Hammer to rotate 360 degrees.
Therefore the body will be paralleled with the ground and makes it easy to clamp onto and lift sheets from the ground.
Mechanical stops prevent Elastomers which take a roll as a shock absorber from stretching during operation.
Elastomers provide a minimum of 90% of vibration isolation for equipment and personal safety
QUICK HYDRAULIC INSTALLATION
Simple hydraulic installation with a full function of control valve resulting in minor plumbing work.
Vibratory hammer from bucket circuit and then clamp will sequentially be operated.
SIMPLICITY IN DESIGN
The adoption of simple design principle allows easy maintenance and prompt troubleshooting for operators both on control and mechanical side.
Together easy operation can be obtained user Friendly design of remote control device.
The BRUCE Hydraulic Vibratory Hammer ranges from 11.5~110 kgm, with centrifugal forces from 506~2697 kN Max. Line pulls from 249 ~800 kN. and amplitudes from 22~25mm can be selected depending on the needs of the customer to suit specific project requirement.
Larger models can be supplied upon request.
Most BRUCE Hydraulic Vibratory Hammers are equipped with high quality hydraulic motors, bearings and 2~8 Eccentrics depending on the model.
The standard frequencies of our vibratory hammers are 1500 rpm, 1600 rpm and 2000 rpm, depending on the model. A variety of other frequencies are also available upon request.
Excavator mounted vibratory hammers are also available upon request and range from 20~50 tons.
The BRUCE Hydraulic Vibratory Hammer is well known for its fine machined components consisting of core parts inside the gear box and related hydraulic connection system.
Therefore, the vibratory hammer matches centrifugal force and amplitude of the vibrations to the soil condition with a speed dial on the hammer’s power pack or through a remote control.
This allows users to adjust the frequency of the vibration depending on the soil condition at each individual jobsite.
The BRUCE Vibro hammers are an efficient hydraulic vibratory hammer that produces vertical vibrations to drive or extract a wide variety of pile profiles that will help you finished the job done in planed project schedule.
BRUCE Vibro hammers are equipped with high quality elastomers which guarantee good shock absorbing and a long service life. Elastomers design makes the Vibro Hammer to change elastomers easy and safely.