Excavator Vibratory Hammer Specification

Excavator Vibratory Hammer Specification

BRUCE Excavator Vibratory Hammer Specification

BRUCE Vibro Hammer
BRUCE SGV-40

Excavator Vibro Specification

BRUCE Vibro Hammer
BRUCE SGV-40T(TILTING)

Excavator Vibro Specification

BRUCE Vibro Hammer
BRUCE SGV-60

Excavator Vibro Specification

BRUCE Vibro Hammer
BRUCE SGV-80E

Excavator Vibro Specification

ADOPTABLE CARRIERS

SGV-40,60 & 80E are built and designed for excavators weighting from 20 tons to 50 tons.
It is built for simplicity, safety, and efficient operation.
Only short hoses are needed for connecting to excavators and clamp cylinder hoses are well protected

A WIDE RANGE OF CONSTRUCTIONAL AREAS

Because of its small size and simple operation procedure, it can be applied for a wide range of working environment such as restriction, drainage maintenance, river-bank maintenance and marshland working wherever onshore and offshore driving job.

ROTATING MOUNTING BRACKET

Excavator mounted Vibratory Hammers are equipped with a rotating mounting bracket that allows the Vibratory Hammer to rotate 360 degrees.
Therefore the body will be paralleled with the ground and makes it easy to clamp onto and lift sheets from the ground.

QUALIFIED ELASTOMERS

Mechanical stops prevent Elastomers which take a roll as a shock absorber from stretching during operation.
Elastomers provide a minimum of 90% of vibration isolation for equipment and personal safety

QUICK HYDRAULIC INSTALLATION

Simple hydraulic installation with a full function of control valve resulting in minor plumbing work.
Vibratory hammer from bucket circuit and then clamp will sequentially be operated.

SIMPLICITY IN DESIGN

The adoption of simple design principle allows easy maintenance and prompt troubleshooting for operators both on control and mechanical side.
Together easy operation can be obtained user Friendly design of remote control device.

HYDRAULIC VIBRO HAMMER
ROTATIONAL GEAR BOX

It has been built with a rotational gear box that allows the equipment to rotate 360° by hydraulically for the ease of pile positioning.

VIBRATION SUPPRESSOR

This is the part of the Vibrator coupled to the boom. It’s connected to the Gear Housing using Elastomers that allows a traction during extractions.

GEAR HOUSING

It consists of the group of Eccentric Bodies Where the Eccentric Weights are assembled with hydraulic motors used for transmitting the motion to the Eccentric Weights.

HYDRAULIC CLAMP

Clamp cylinders are made from solid blocks to eliminate troublesome guards and tie-rods It’s well suited for any type of sheet piling job.

ELASTOMER RUBBERS

The qualified Elastomers are selected for Dynamic part that creates environmentally low noises and are substantially tough enough to sustain the power of heavy extraction during operations which could result in 90% of vibration isolation can be provided for equipment and personal safety.

Bruce TILTING (SIDE GRIP) TYPE VIBRO HAMMER AVAILABLE

Bruce excavator mounted Vibro Hammer is available 90 degree
Tilting Type (hydraulically operational) for easy side grip of sheet pile without assistance of workers, the details are mentioned below.

BRUCE Piling Equipment Co., Ltd. is dedicated to helping construction and drilling companies achieve precise,
high-quality results from their drilling equipment.

The Pile Driving Equipment, Hydraulic Impact Hammer, Pile Hammer, Piling Hammers, Vibro Hammer, Vibratory Hammer
for Most of Excavator & Crane suitable, BRUCE

BRUCE PILING EQUIPMENT ASSOCIATION

Learn more about associated business firm or organization, industries, business certification, technical certification in regard to Piling Industries and Bruce Piling Equipment !!