BRUCE PILING EQUIPMENT
The Bruce SGH-4719 successfully completed the pile driving of SakonnetRiver Bridge at RI, USA
RI DOT : Pile Driving Completed at SakonnetRiver Bridge Project
The Rhode Island Department of Transportation (DOT) announced Thursday that it has concluded pile driving operations on the SakonnetRiver Bridge project in Tiverton and Portsmouth.
The last round of pile driving concluded on Tuesday, and positive test results available Thursday on the success of that operation means that the department can conclude this phase of the bridge project.
“We appreciate the patience of the residents and business owners near the bridge and apologize for the noise and disruption the pile driving operations caused, ” DOT Director Michael P. Lewis said. “We are excited to reach this milestone thanks to the efforts of our contractor, CardiCorp., as we continue replacing this valuable transportation link to Aquidneck Island.” The DOT broke ground on the bridge replacement project in April 2009.
The $163.7 million contract with CardiCorp. for the construction of the new bridge is the largest single contract in DOT’s history.
The department anticipates the new bridge to be open to traffic in spring 2012; however, the contract with CardiCorp.
includes an early incentive clause which could result in the bridge opening to traffic earlier.
BRUCE HAMMER SUCCESS STORY, BRIDGE PILING Model SGH-4719 Pile Hammer (Max. Energy 89.3 ton.m)
Pile driving was necessary to set large steel piles into the river bottom.
Upon these piles, driven in various patterns and tovarying depths, the DOT will build the concrete piers that will support the new bridge.
Nearly 500 piles were driven in the past year, including 30 large cylindrical pipe piles that were driven to more than 200 feet below the river bottom.
An estimated 40,000 vehicles per day cross the SakonnetRiver Bridge, which carries Route 24 between Portsmouth and Tiverton.
The bridge currently has an 18-ton weight limit, requiring truck traffic to and from the Aquidneck Island communities of Newport, Middletown and Portsmouth to seek alternate routes–often resulting in a detour up to 30 miles long.
One of The Worlds Biggest Hammers will be used on the SakonnetRiver bridge Project
TIVERTON, R.I., (WPRI) -One of the world’s largest hammers is coming to Rhode Island.
The new SakonnetRiver Bridge that connects Tiverton and Portsmouth has hired a hydraulic pile hammer known as “BRUCE SGH-4719.” The hammer is made in South Korea, it weighs 86.6 tons.
The remote controlled hammer will pile drive 200 foot long steel casing pipes, 72 inches in diameter, for the foundation of the new bridge.
The design of the hammer was made for tough projects like this.
BRUCE PILING EQUIPMENT