Mounted on Excavator Arm End
The Bruce SGH-0212 pile hammer is mounted on excavator arm end and
mounted by Sliding Bracket. The hydraulic source is powered from existing hydraulic
breaker line of excavator.
BRUCE Hydraulic Pile hammer is widely applicable and selectable in most case of pile driving condition.
Full model lined up and most wide selectable BRUCE model among world reputable manufacturers.
Wide Range of Pile Driving Application, Higher Energy Efficiency, Reliability of electrical and hydraulic pile hammer system, Various Hammer Mounting Type
|Ram Weight||2 ton||4409 lbs|
|Min. Stroke||200 mm||0.66 ft|
|Max. Stroke||1200 mm||3.94 ft|
|Max. Potential Energy||2.4 ton.m||24 kN.m|
|Blow Rate at Max, Stroke||40 bpm||40 bpm|
|Operating Pressure||210 bar||3,046 psi|
|Required Flow Rate||100 lpm||27 gpm|
|Suitable Excavator||24~30 tons|