U-Type Leads
Standard size of Bruce U Type Leads are 27inch, 32 inch, 42inch, 57inch, 76inch, 84inch and other size custom tailor made is also available
BRUCE U-Type Leads
Hits: 14
HYDRAULIC PILE HAMMER U-TYPE LEADS
The Pile Driving Equipment, Hydraulic Impact Hammer, Pile Hammer, Piling Hammers, Vibro Hammer, Vibratory Hammer for Most of Excavator Crane suitable, BRUCE
U-Type Leads
This type is also one of the most frequently used Leader type for BRUCE Pile Hammer mounting on the Leader for the purpose of driving into a more difficult to set up. This type of Leader is more accurately advanced method for pile driving and more sophisticated Leader type than a Fixed Leader Type in terms of the Pile Hammer is interlocking inside the box type Leader to slide or to stick to it accommodating a more precise pile driving.
Piling Accessories
These leads are attached to the crane at the top by the main cable.
They have a gate at the bottom which holds the leads around the pile and will sometimes have spikes on the bottom which are stuck into the ground or template to assist in aligning the hammer.
This type of lead has a pivot or sliding connection to the crane at either the top or bottom of the leads.
Normally the connection is at the top of the leads
Hammer cushions are constructed of man-made materials that are heat resistant, durable and absorb a certain amount of shock.
Common types of materials are aluminum, micarta and polymer which are in the form of disks
Pile cushions are placed between the pile top and the pile cap on concrete piles.
Pile cushions are not used on steel piles or timber piles.
This is the section of the pile driving system which rests between the hammer and the pile.
For concrete piles, it contains the striker plate or drive cap, a hammer cushion, and the pile cushion
Bruce provides also Followers which is :
An extension, usually steel, used between the top of the pile and the hammer to extend the driving range of the pile (usually below water)
