EXCAVATOR MOUNTED VIBRO HAMMER
BRUCE Excavator Mounted Vibro Hammers are powerful and substantially applicable to a accurate design of sheet pile walls of deep excavation for operating ease and efficiency.
I f vibratory technology is suitable for your Project, the BRUCE Vibro Hammers are the most productive techniques in the construction sector.
No necessary to additional power pack and power unit and just pick up the hydraulic supply from existed excavator supply line.
High strength and powered hydraulic clamp device is delivering sheet pile clamping ensuring and grabbing.
Reliable hydraulic motor deliver high efficiency of vibrating power.
Hydraulically operated 360° Rotation functioning are convenient for easy poisoning the sheet pile and easy clamping the sheet pile.
High quality and reliable life of elastomers are adopted to isolate vibration being transmitted to excavator thus eliminated vibration is transmitted to excavator and preventing the machine.
OUTSTANDING FEATURES OF EXCAVATOR VIBRO HAMMER
It has been built with a rotational gear box that allows the equipment to rotate 360° by hydraulically for the ease of pile positioning.
This is the part of the Vibrator coupled to the boom. It’s connected to the Gear Housing using Elastomers that allows a traction during extractions.
Clamp cylinders are made from solid blocks to eliminate troublesome guards and tie-rods It’s well suited for any type of sheet piling job.
The qualified Elastomers are selected for Dynamic part that creates environmentally low noises and are substantially tough enough to sustain the power of heavy extraction during operations which could result in 90% of vibration isolation can be provided for equipment and personal safety.
It consists of the group of Eccentric Bodies Where the Eccentric Weights are assembled with hydraulic motors used for transmitting the motion to the Eccentric Weights.
Excavator Mounted Type
BRUCE Excavator Mounted Vibro Hammer is manufactured and supplied by Bruce factory and as known globally in the worldwide piling industries with reputable quality and economical way
SGV-40,60 & 80E are built and designed for excavators weighting from 20 tons to 50 tons.
It is built for simplicity, safety, and efficient operation.
Only short hoses are needed for connecting to excavators and clamp cylinder hoses are well protected
Because of its small size and simple operation procedure, it can be applied for a wide range of working environment such as restriction, drainage maintenance, river-bank maintenance and marshland working wherever onshore and offshore driving job.
Excavator mounted Vibratory Hammers are equipped with a rotating mounting bracket that allows the Vibratory Hammer to rotate 360 degrees.
Therefore the body will be paralleled with the ground and makes it easy to clamp onto and lift sheets from the ground.
Mechanical stops prevent Elastomers which take a roll as a shock absorber from stretching during operation.
Elastomers provide a minimum of 90% of vibration isolation for equipment and personal safety.
Simple hydraulic installation with a full function of control valve resulting in minor plumbing work.
Vibratory hammer from bucket circuit and then clamp will sequentially be operated.
The adoption of simple design principle allows easy maintenance and prompt troubleshooting for operators both on control and mechanical side.
Together easy operation can be obtained user Friendly design of remote control device.
Excavator Mounted Vibro Hammer
(TILTING TYPE)
English
Korean
Espanol