BRUCE PILING EQUIPMENT
BRUCE Piling Equipment Co., Ltd. is dedicated to helping construction and drilling companies achieve precise, high-quality results from their drilling equipment.
Pile Driving Equipment News & Event
BRUCE Hammer SGH-1015 At Port Expansion Project
CRANE SUSPENDED WITH AN ADJUSTABLE LONG PILE SKIRT UP TO 1000MM
The BRUCE has supplied the hydraulic impact pile hammer at its port expansion construction.
The BRUCE hydraulic pile hammer SGH-1015 with a maximum potential impact energy of 15 ton.m and blow rate of 35 bpm powered by hydraulic power pack PQ-250 with 240 hp of Cummins Engine QSB 6.7 and quality proven Pump had made it an economic and dependable choice.
The growth in freight and the critical role of the ports in the regional and national economy are the key reasons given by Ports for expanding its operations into this port.
The port company said, facilitated 22 per cent of the regional economy and sustained 187,000 jobs.
This was expected to grow to 628,000 jobs by 2031. Over the past 20 years, container volume growth has averaged 6.74 per cent.
Under the economic growth targets in the city Plan, the role and capacity of the port will need to expand even more than under standard economic growth patterns.
Then last month, the port took a different tack in its submission on the Plan to retain ports.
Assembly and installation of SGH-1015 hammer
We must be able to demonstrate competency in operating the Hammer, including, where relevant operating the lifting hammer in a proper, safe, controlled and smooth manner in accordance with the crane specifications.
We began to weigh the Hammer weights to meet the requirements from the customer asked the Hammer weight to be comparatively light than we made before.
Assembly and installation of BRUCE hammer was proceeded by an typical procedure of hammer assembly following to BRUCE’s long years of experience for both Hammer and Power Pack.
A piece of equipment the BRUCE hammer SGH-1015 and power pack PQ-250 had finished assembly and installing hose bundles, electrical cables including all sensors for continuous Monitoring and no functional failure are proofed, before going to the job site.
Casing piles has driven by the BRUCE SGH-1015
BRUCE hammer SGH-1015 had come in a full scale of piling work with couple of rounded casing piles together with a crowd of customer to check the hammer can handle in access ultimate bearing capacity and potential energy in at 15 tons with a maximum stroke of 1.5 meters.
The BRUCE hammer carried out a high energy transfer into piles up to 90 percent and could operate without loss of energy according to finish test result instrumented by the customer
